Plan your installation

Step One

Draw your total room area including all fixed furniture such as kitchen units, toilets and sink areas. Mark your drawing with all relevant dimensions.

Step Two

Calculate the total square area of the floor to be heated.

Step Three

Decide on your heating requirements, most bathrooms and kitchen areas require about 150watts per square meter. If you require any further advice or information on heating loads please do not hesitate to contact us on 01299 266 536

Step Four

Multiply the square area of the floor to be heated by the heating load. For example if the square area of the floor to be heated is 6.0 sqm and the heating load required is 150watts per square meter the total heating load would be 900watts.

Step Five

Select the nearest eflex cable or kit for the calculated total load. For example total load required 900watts you would select a ef1000 or eF1000kit.

eFlex Installation plan

It is important when calculating your eCable spacing to accurately draw your room area as this will help to save time and ensure a smooth installation.